Do you have a question about the Denver CAD-495 and is the answer not in the manual?
signal to noise ratio | > 60 dB |
---|---|
channel separation | > 50 dB (1kHz) |
frequency response | 20Hz - 20 kHz |
frequency range | 87.5-108 MHz |
---|---|
intermediate frequency | 10.7 MHz |
sensitivity | 2.8 µV |
output | 1.5 V (max.) |
---|---|
impedance | 10k Ohm |
frequency response | 20 Hz - 20 kHz |
---|---|
sensitivity | 775 mV |
impedance | 20k Ohm |
power supply | 12V DC (10.8-15.6V allowable) |
---|---|
speaker impedance | 4 or 8 ohm |
output power | 40W x 4CH |