Need help?Do you have a question about the Denver CAD-370 and is the answer not in the manual?
Instructions for replacing blown fuses, with warnings about amperage and potential malfunctions.
Explains how to power the unit on/off and use the SEL button for various audio and radio functions.
Details TA SEEK/ALARM, MASK DPI, and RETUNE functions for optimal radio reception.
Provides details on the RDS system, including AF (Alternative Frequencies) and TA (Traffic Announcement).
Guides on selecting music or speech program types to search for specific radio content.
Covers manual/automatic tuning, seek tuning, and scan functions for radio stations.
Guides on searching for MP3 files by track number, file name, or character.
Instructions for replacing blown fuses, with warnings about amperage and potential malfunctions.
Explains how to power the unit on/off and use the SEL button for various audio and radio functions.
Details TA SEEK/ALARM, MASK DPI, and RETUNE functions for optimal radio reception.
Provides details on the RDS system, including AF (Alternative Frequencies) and TA (Traffic Announcement).
Guides on selecting music or speech program types to search for specific radio content.
Covers manual/automatic tuning, seek tuning, and scan functions for radio stations.
Guides on searching for MP3 files by track number, file name, or character.
CD/MP3 Player Section| Signal to Noise Ratio | > 60 dB |
|---|---|
| Channel Separation | > 50 dB (1 kHz) |
| Frequency Response | 20 Hz - 20 kHz |
Tuner (FM)| Frequency range | 87.5-108 MHz |
|---|---|
| Intermediate frequency | 10.7 MHz |
| Sensitivity | 2.8 µV |
| Stereo separation | 30 dB |
| Signal to noise ratio | 50 dB |
| Channel step | 50 kHz |
Line-Out| Output | 350 mV |
|---|---|
| Impedance | 10 kOhm |
General| Power Supply | 13.8 V DC (10.8-15.6 V allowable) |
|---|---|
| Speaker impedance | 4 or 8 ohm |
| Output power | 40 W x 4 CH |
To Next Page
