Do you have a question about the Denver CAD-474BT and is the answer not in the manual?
signal to noise ratio | 60 dB |
---|---|
channel separation | 50 dB (1kHz) |
frequency response | 20Hz - 20 kHz |
frequency range | 87.5-108 MHz |
---|---|
sensitivity | 2.8 µV |
stereo separation | 30 dB |
output | 2V (max.) |
---|---|
impedance | 10k Ohm |
frequency response | 20 Hz - 20 kHz |
---|---|
sensitivity | 775 mV |
impedance | 20k Ohm |
power supply | 12V DC (10.8-15.6V) allowable) |
---|---|
speaker impedance | 4 or 8 Ohm |
output power | 40W x 4CH |