Do you have a question about the Denver CAU-420 and is the answer not in the manual?
Signal to Noise Ratio | > 60 dB |
---|---|
Channel Separation | > 50 dB (1kHz) |
Frequency Response | 20Hz - 20 kHz |
Frequency Range | 87.5-108 MHz |
---|---|
Sensitivity | 2.8 µV |
Stereo Separation | 30 dB |
Signal to Noise Ratio | 50 dB |
Channel Step | 50 kHz |
Output | 350 mV |
---|---|
Impedance | 10k Ohm |
Frequency Response | 20 Hz - 20 kHz |
---|---|
Sensitivity | 775 mV |
Impedance | 20k Ohm |
Power Supply | 12V DC (10.8-15.6V allowable) |
---|---|
Speaker Impedance | 4 or 8 Ohm |
Output Power | 40W x 4CH |
Fuse | 10A |