Do you have a question about the Denver CAD-405 and is the answer not in the manual?
| signal to noise ratio | > 60 dB |
|---|---|
| channel separation | > 50 dB (1kHz) |
| frequency response | 20Hz - 20 kHz |
| frequency range | 87.5-108 MHz |
|---|---|
| intermediate frequency | 10.7 MHz |
| sensitivity | 2.8 µV |
| stereo separation | 30 dB |
| signal to noise ratio | 50 dB |
| channel step | 50 kHz |
| output voltage | 1.5 V (max.) |
|---|---|
| impedance | 10k Ohm |
| frequency response | 20 Hz - 20 kHz |
|---|---|
| sensitivity | 775 mV |
| impedance | 20k Ohm |
| power supply | 12V DC (10.8-15.6V allowable) |
|---|---|
| speaker impedance | 4 or 8 ohm |
| output power | 40W x 4CH |
| fuse | 10A |