Denver CAT-730 - Operations Common for CD;MP3;WMA;VCD;DVD;MP4

EN9
‘AF’ Function (Alternative Frequencies)
- Whenpressedshort,AFswitchingmodeisselected.
- TheradiochecksthesignalstrengthoftheAFallthetime,whenitbecomestooweak,theunitdetectsffrom
theAFsignalonwhichfrequenciesitmustsearchforabettertransmitter.
‘TA’ Function (Trafc Announcement)
Whenpressedshort,itisactivatedasTAmodeonoroff.WhenTAmodeisonandtrafcannouncementis
transmitted.
– WhentheunitisitCD/MP3mode,itwillswitchtoradiomodetemporarily.
– Ifthevolumelevelwasunderthethresholdpoint,itwillberaisedtothethresholdpoint.
‘PTY’ Function (Program Type)
1.PressandholdPTY buttontoturnONProgramtype.
2.RotateVOLknobtoselectprogramtype.
3.Oncedesiredprogramshows,simplypress PTYbuttononcemoreand unitstartsearchingforavailable
stations.
Note: Program type will ash when searching for stations.
OPERATIONS COMMON FOR CD/MP3/WMA/VCD/DVD/MP4
Search Previous / Next Folder
DuringMP3playback,pressandholdFL-/FL+buttontogotoprevious/nextfolder.
Note: Disc / media sources must contain folder name for this function to work.
Specifying particular track
Duringplayback,alltracklenamesunderafolderwillbedisplayedonthescreenwiththeircorrespondingtrack
number.Youcanusethenavigationkeypadontheremotecontroltoaccessthele.
Tips:
To select track 3, press 3.
To select 13, press and hold 10+ follow by 3.
To select 23, press and hold 10+ (2 times) follow by 3.
Random Playback
PressRDM duringplaybacktoplaythetracksinrandom/shufeorder.Pressitagaintocancel.
Tips: RDM is SHUFFLE on screen.
Stopping Playback
1. PressStoponremotecontrolduringplaybacktostopplayback.Thatpositionisstoredinmemory.
2. Press tocontinue.Playbackstartsfromthepositionatwhichitwasstopped.
3. Topermanentlystopplayback,pressStopbuttontwice.
Note: There is no STOP function in audio playback. Audio playback uses function.
Fast Forward / Fast Reverse
1. Duringplayback,pressandhold or .Unitscansatthespeedofx2-x4-x8-x16-x20
2. Toresumenormalplaybackatadesiredpoint,press .
Note: No sound is played during fast forward / fast reverse.
Finding the Beginning of Tracks
Duringplayback,press or .
:Presstostartplaybackfromthebeginningofthepreviouschapterortrack.
:Presstostartplaybackfromthebeginningofthefollowingchapterortrack.
Pause Playback
Duringplayback,press .Pressagaintoresumeplayback.
A-B Repeat Playback
ThisfeatureallowsyoutoloopplaybackasectionofthemoviestartingfromPointAtoB.
1.Pressthe buttontoplaythemovie.
2.Onceyouhavelocatedthesectionyouwishtoplaybackonlooprepeat,pressandholdA-B button.Youwill
see“Rep-A” onthescreen.
3.Letthemovieplayonuntilyouhavereachedtheendofthesectionyouwishtowatchoncontinuousloop.
Onceyouhavereachedthispoint,pressandholdA-B buttonagain.“Rep-A-B” willappearonyourscreen.
PlaybackwillnowstartfromPointA–B.
4.TostopA-Brepeatplayback,pressandholdA-B buttononcemoreuntil“Rep-A-B” disappearsandnormal
playbackresumes.