ENG-12
Sleep timer
You can set your radio to turn off automatically using the sleep timer.
You can choose from 15, 30, 45, 60 and 90 minutes or Off.
1.
Press and hold the ‘Info/Menu’ button on the top of the radio.
2.
Use ‘Station +’ and ‘- Station’ buttons to scroll to <System>. Press and
release the ‘Select’ button.
3.
‘<Sleep>’ is displayed. Press and release the ‘Select’ button again.
4.
Use the ‘Station +’ or ‘- Station’ buttons to display the sleep time you
would like. Press and releases ‘Select’ to confirm.
An ‘S’ will appear in the top left of the display, together with the number
of minutes until your radio will automatically switch off.
Note: To cancel the sleep time, follow the steps above and in step 4., use
the ‘Station +’ or ‘- Station’ buttons to display ‘Sleep off’. Press and release
‘Select’ to confirm.
System settings
Your radio must be switched on (not in Standby mode) when you change
the system settings.
Manually set the date and time
1.
Press and hold the ‘Info/Menu’ button on the top of your radio.
2.
Use the ‘Station +’ and ‘- Station’ buttons to scroll to <System>. Press
and release the ‘Select’ button.
3.
Use the ‘Station +’ and ‘- Station’ buttons to scroll to <Time>. Press
and release the ‘Select’ button.
4.
<Set Time/Date> is displayed. Press and release the ‘Select’ button again.
5.
‘Set Time’ is displayed and the hour digits will flash. Use the ‘Station +’ and
‘- Station’ buttons to display the correct hour in 24 hour clock. Press and
release the ‘Select’ button.
6.
The minutes will flash. Use the ‘Station +’ and ‘- Station’ buttons to display
the correct minutes. Press and release the ‘Select’ button.
7.
‘Set date’ is displayed and the ‘Day’ will flash Use the ‘Station +’ and
‘- Station’ buttons to display the day. Press and release the ‘Select’ button.
To Next Page
Loading...