ENG-7
Manuelle Sendersuche
Using the manual tune feature you can select a specific digital radio channel
frequency and then manually adjust the aerial, or the location of the radio,
to get the strongest possible signal for that channel in your location.
1. Press and hold the ‘Info/Menu’ button on the top of the radio until
‘<Full scan>’ is displayed.
2. Use the ‘Station +’ and ‘- Station’ buttons to scroll to <Manual tune>.
Press and release the ‘Select’ button.
3. Use the ‘Station +’ and ‘- Station’ buttons to scroll through the digital radio
frequencies. Stop when the frequency you would like to listen to is displayed.
Press and release the ‘Select’ button. An empty will appear on the second
line of the display to indicate the minimum signal strength for acceptable
listening. After a few seconds, the row of solid rectangles will indicate the
actual signal strength that you are receiving. The stronger the signal, the
further to the right the row of solid rectangles will be.
Note: You may need to adjust the aerial or move your radio to get the
strongest possible signal.
4.
Press and hold the ‘Info/Menu’ button and then release to step back through
the menu to the station display.
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received
in your area. These are listed with ‘?’ prefix.
1.
Press and hold the ‘Info/Menu’ button on the top of the radio until
‘<Full scan>’ is displayed.
2.
Use the ‘Station +’ and ‘- Station’ buttons to scroll to <Prune>. Press
and release the ‘Select’ button.
3.
‘Prune <No> Yes’ is displayed. Use the ‘Station +’ and ‘- Station’ buttons to
scroll to ‘Yes’. Press and release the ‘Select’ button to confirm and prune the
station list. stations with a ‘?’ prefix will now no longer be displayed.
4.
Press and hold the ‘Info/Menu’ button to return to the station display.
Storing a DAB station preset
Your radio can store up to 9 DAB stations in its preset memories for
instant access to your favourite stations.
To Next Page
Loading...