Denver LDD-2260MC - Audio Menu; TV MENU

10
ATV Source
Audio Menu
Press MENU button on the front of panel or MENU on the remote control to display the main menu.
Press ◄ / ► button to select Audio in the main menu, then press OK button or ▼ button to enter.
AUDIO
Volume
Balance
Treble
Bass
50
0
50
51
SPDIF Output
EqualiZer
OFF
1. Press ▼ / ▲ / ◄ / ► button to select the entry that you want to adjust.
2. Press OK button to enter and press ◄ / ► button to adjust or press ▼ / ▲ button to select.
3. After finishing your adjustment, Press MENU or EXIT button to save and return back to the previous menu.
Volume: Press ▼ / ▲ / ◄ / ► button to select Volume, then press OK button to enter and press ◄ / ► button to adjust.
Balance: Press ▼ / ▲ / ◄ / ► button to select Balance, then press OK button to enter and press ◄ / ► button to adjust.
Treble: Press ▼ / ▲ / ◄ / ► button to select Treble, then press OK button to enter and press ◄ / ► button to adjust.
Bass: Press ▼ / ▲ / ◄ / ► button to select Bass, then press OK button to enter and press ◄ / ► button to adjust.
SPDIF Output: Press ▼ / ▲ / ◄ / ► button to select SPDIF Output, then press OK button to enter and press ▼ / ▲ button
to select. (AvailableSPDIF output: Off, PCM, RAW)
Equalizer: Press ▼ / ▲ / ◄ / ► button to select Equalizer, then press OK button to enter.
Press ▼ / ▲ button to select Rock, Country, Jazz, Classical, Blue, Default, Customer.
Only in the Customer Mode, you can set the Equlizer you want to set.
Press MENU button on the front of panel or MENU on the remote control to display the main menu.
Press ◄ / ► button to select TV in the main menu, then press OK button or ▼ button to enter.
1. Press ▼ / ▲ / ◄ / ► button to select the entry that you want to adjust.
2. Press OK button to enter and press ◄ / ► / ▼ / ▲ button to edit.
3. After finishing your adjustment, Press MENU or EXIT button to save and return back to the previous menu.
Program Edit: Press ▼ / ▲ / ◄ / ► button to select Program Table, then press OK button to enter.
Service Type: Press ▼ / ▲ / ◄ / ► button to select Service Type, then press OK button to enter and press OK button to
adjust.
TV MENU
TV
Program Edit
EPG
Auto Search
Manual Search
Move
Exit
Select
Move
Exit
Select