Denver TDA-60 - Alarm and Sleep Functions; Setting the Alarm Time

5. Press the “ENTER / PLAY / PAUSE / CLOCK” button to confirm the hour.
6. Repeat step 4 and 5 to set the minute / date.
NOTE:
• Press and hold the “ENTER / PLAY / PAUSE / CLOCK” button during operation order to briefly display the current
time.
Setting of the alarm time
The system must be in standby mode in order to set the alarm.
You have the option of setting two alarm times. Proceed as follows:
1. Press the “VOLUME- / ALARM 1” button for about 3 seconds. The hours of the currently set alarm time will start to
flash.
2. Perform the settings with the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons.
3. Press the “VOLUME- / ALARM 1” button to confirm. The minutes will start to flash.
4. Perform the settings with “SKIP+ / TUNING+” & “SKIP- / TUNING-” button.
5. Press the “VOLUME- / ALARM 1” button to confirm. Then choose how you would like to be woken up. Perform the
settings with the and buttons.
The selection is as follows:
• CD:
As soon as the set alarm time has been reached, the device will turn on in CD mode. The inserted CD will be played
from the first track.
• USB:
As soon as the set alarm time has been reached, the device will turn on in USB mode. The tracks of the connected
storage device will be played from the first track.
• DAB:
As soon as the set alarm time has been reached, the radio will turn on. The last preset station will play.
• FM:
As soon as the set alarm time has been reached, the radio will turn on. The last preset station will play.
• BUZZ:
A buzzer will sound when reaching the alarm time.
6. Finally, press the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons to set the alarm volume. Press the “VOLUME- /
ALARM 1” to confirm.
To set the second alarm time, repeat each of the above steps with the “VOLUME+ / ALARM 2” button.
In order to deactivate the alarm function, press the “VOLUME- / ALARM 1” or “VOLUME+ / ALARM 2” button.
Snooze
The automatically set alarm function can be switched off for 9 minutes with the “SLEEP / SNOOZE” button.
Sleep
1. Press the “SLEEP / SNOOZE” button to enter.