Denver TDA-60 - DAB Radio Operation; Listening to DAB Stations; Scanning for DAB Stations; Saving DAB Stations

2. Press the “SLEEP / SNOOZE” buttons to set SLEEP time (120, 110, 100。。。10, 5, OFF) and press “ENTER / PLAY
/ PAUSE / CLOCK” button to confirm.
3. To cancel SLEEP, follow above step 1 to 2 and set the SLEEP time to “OFF”.
Listening to the DAB
1. Select the DAB mode with the “STANDBY / FUNCTION” button, until “DAB” is shown in the display.
2. The device automatically searches for DAB stations.
3. You can select the next or the previous station by using the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons.
NOTE:
• If the reception is too weak, try to improve the reception by changing the position of the antenna.
Scan DAB station
1. Press the “STANDBY / FUNCTION” button, until “DAB” is shown in the display.
2. Keep the “AMS / MODE” button pressed. The device will start the station scan.
Save Station
1. If you have found the desired station, press the “AMS / MODE” button. The first preset location appears on the display. If the
preset location is still empty the word EMPTY appears under PRESET STORE.
2. For choosing the memory position, please press “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons.
3. Press the “ENTER / PLAY / PAUSE / CLOCK” button to save the settings.
Select a preset station
1. Press the “PRE. / FOLDER” button to choose a memory position.
Display additional DAB information
In DAB mode, you can display the following additional information if broadcast by the radio station. To do so, press the “INFO”
button.
The DLS text is shown on the display by default.
• DLS: Short for Dynamic Label Segment. This involves complementary data. This content may be e.g. Information about the
station or the music title and artist being played. If information on the track title is transmitted by the station, you can display
this information with the “INFO” button.
• Displays the received signal strength.
• This indicates the station category (e.g. Pop-Music, News etc.).
• Displays the name of the station group.
• Frequency of the current radio station.
• The “SIGNAL ERROR” display shows the signal quality.
The lower the adjacent figure, the better the quality.