______________________________________________________________________________
DESMI Pumping Technology A/S 17
Tagholm 1
9400 Nørresundby – Denmark
Tel: +45 96 32 81 11 Fax: +45 98 17 54 99
E-mail: desmi@desmi.com
www.desmi.com
The powers stated in the table below are the highest possible absorbed by the pump,
whereas the min./max. values for flow and pressure indicate DESMI's recommended
operating range for the pump.
The above-mentioned max. working pressure is NOT valid for pumps approved by a
classification society. Pumps approved by classification societies have been pressure
tested according to the requirements of these societies, i.e. a test pressure of 1.5 x the
permissible working pressure. The test pressure is stated in the test certificate and stamped
into the discharge flange of the pump.
Max. Power
kw
1450/1750/-
2950/3500 RPM
Min. Flow
m3/h
1450/1750/-
2950/3500 RPM
Max. Flow
m3/h
1450/1750/-
2950/3500 RPM
Min.Pressure
mWC
1450/1750/-
2950/3500 RPM
Max. Pressure
mWC
1450/1750/-
2950/3500RPM