Why does my Dettson Air Conditioner have high pressure protection?
High pressure protection in your Dettson Air Conditioner, resulting in the unit stopping, can be due to poor heat exchange (blockage), ambient temperature being too high, or an excessive amount of refrigerant.
What causes anti-freeze protection in a Dettson COND-OCD-09 Air Conditioner?
Anti-freeze protection in your Dettson Air Conditioner, which causes the outdoor unit to stop in cooling mode, can be triggered by poor air exchange in the indoor unit, abnormal fan speed, or a dirty evaporator.
Why does my Dettson Air Conditioner have high temp. protection?
High temperature protection in your Dettson Air Conditioner, resulting in the unit stopping, can be attributed to poor heat exchange or high ambient temperature.
Why does my Dettson COND-OCD-09 Air Conditioner have frequency limit (overload)?
The frequency of your Dettson Air Conditioner may be limited (decreased frequency) due to overload, which can be caused by poor heat exchange or high ambient temperature.
Why does my Dettson COND-OCD-09 Air Conditioner have frequency limit (overcurrent)?
The frequency of your Dettson Air Conditioner may be limited (decreased frequency) due to overcurrent, which can be caused by low input voltage, overload, or high system pressure.
Why does my Dettson Air Conditioner have frequency limit (discharge)?
The frequency of your Dettson Air Conditioner may be limited (decreased frequency) due to discharge issues, which can be caused by overload, high temperature, lack of refrigerant, or a defective EXV.
Why does my Dettson Air Conditioner have frequnecy limit (anti-freeze)?
The frequency of your Dettson Air Conditioner may be limited (decreased frequency) due to anti-freeze issues, which can be caused by poor indoor heat exchange or the fan running too slowly.
What does EEPROM error mean on Dettson COND-OCD-09?
An EEPROM error on your Dettson Air Conditioner, which causes the unit to stop, indicates a defective outdoor unit (ODU) control board.
What does IPM protection mean for Dettson COND-OCD-09 Air Conditioner?
If your Dettson Air Conditioner stops due to IPM protection, the error should disappear on its own or after a power cycle. If it persists, it may indicate a defective board.
What does ambient sensor error mean on Dettson COND-OCD-09 Air Conditioner?
An ambient sensor error on your Dettson Air Conditioner, which causes the unit to stop, indicates that the sensor is either damaged or disconnected.
General| Brand | Dettson |
|---|---|
| Model | COND-OCD-09 |
| Category | Air Conditioner |
| Language | English |
To Next Page
