ElectroVap RTH-V2
13
Pictures and values are not contractual - The devices may be subject to changes without notice
3.2.2 Connecon guidelines
Water pressure : between 2 bar & 6 bar MAX.
Water temperature : < 40°C.
The water supply connecon is under the unit. The humidier is delivered with a water inlet hose of 50 cm long with a
3/4" female ng to the cold water supply. A direct copper connecon is PROHIBITED.
For the maintenance, an isolaon valve should be installed close to the humidier.
OVERFLOW RISKS :
Isolation
valve
Water system
3.2 WATER SUPPLY
3.2.1 W
•
•
To ensure water
T
An excess of sodium chloride may generate foam which disturbs the correct running of the
To Next Page
Loading...
