ElectroVap RTH-V2
57
Pictures and values are not contractual - The devices may be subject to changes without notice
Fig. 7
Fig. 8
Fig. 10
Fig. 11
Fig. 12
2
1
1.
2.
3.
4. make sure to put it back in
resistors must be replaced in the cable clamp provided for this
purpose (see Fig. 12).
5.
hoses.
THE HUMIDIFIER IS NOW READY AGAIN!
To check:
-TANK GASKET:
-CLAMPS:
-FAUCET AERATOR:
-RESISTORS:
-TEMPERATURE SENSOR:
Fig. 9
To Next Page
Loading...
