SB-2-775-A Page 7
ENGLISH
702576 (Aluminum)
900 cc Cup
GFC-501 (Acetal)
20 Oz. Cup
Gravity Feed Cups
These gravity feed cups
are designed to be used
with FLG, GFG, GFHV,
GTI or PRI gravity feed
spray guns.
HARG-510 Air Regulator
Use to maintain nearly constant outlet
pressure despite changes in inlet pres-
sure and downstream flow.
Air Adjusting Valves
Use to control air usage
at gun.
WR-103 Wrench
192219
Gun Holder
Gun holder made to hold
guns with gravity cups.
Contains all necessary
tip, hose and nut sizes
used on or with gun.
ACCESSORIES
40-128
Twin Cartridge,
Paint Spray
Respirator
NIOSH-Certified (TC84A-
1623) for respiratory
protection in atmos-
pheres not immediately
dangerous to life.
GH-505 Gun Holder
Gun holders are made to
hold standard paint cups,
gravity feed guns and
cups, and paint filters.
FLG-463
Air Cap Test Kit
(#3 air cap)
The purpose of this test kit is
to measure air cap atomizing
air pressure at the center air
port of the air cap. Used to
confirm code compliance
and as a daily quality control
measure.
OMX-70-K48 PAINT CUP LINER KIT
(Not for use with GFC-503 cups)
Allows quick and easy clean-up.
Consists of:
1 - Piercing Tool
48 - Disposable Liners
48 - Drain Bushings
Spray Gun
Lube
SSL-10
(2 oz.
bottle)
Compatible with all
paint materials; con-
tains no silicone or
petroleum distillates
to contaminate paint.
MSDS available upon
request.
Automotive Quick Connects
For HVLP Guns (Air)
High Flow Type.
HC-4720 Coupler
1/4" NPT(F)
HC-1166 Stem
1/4" NPT(M)
HC-4419 Stem
1/4" NPT(F)
HC-4719 Coupler
1/4" NPT(M) /NPS(M)
192212 Professional Spray Gun
Cleaning Kit
Contains six precision tools designed to ef-
fectively clean all DeVilbiss, Binks, Finishline
and other brand spray guns.
192218 Scrubs
®
Hand Cleaner Towels
Scrubs
®
are a premoistened hand
cleaner towel for painters, body
men and mechanics that go where
you go and no water is needed.
HAF-507 Whirlwind™
In-Line Air Filter
Removes
water, oil,
and debris
from the
air line.
HAV-500 No Gauge
HAV-512 w/0-100 psi
Dial Gauge
HAV-555 w/0-160 psi
Digital Gauge
WARRANTY
This product is covered by DeVilbiss' 1 Year Limited Warranty.
DeVilbiss Sales and Service: www.devilbiss.com
DeVilbiss Automotive Refinishing
DeVilbiss has authorized distributors throughout the world.
For equipment, parts and service, check the Yellow Pages
under “Automotive Body Shop Equipment and Supplies.”
For technical assistance, see listing below.
U.S.A./Canada Customer Service Office:
11360 S. Airfield Road, Swanton, OH 43558
Toll-Free Telephone: 1-800-445-3988 (U.S.A. and Canada only)
Toll-Free Fax: 1-800-445-6643
10/11 © 2011 DeVilbiss Automotive Refinishing All rights reserved. Printed in U.S.A.
To Previous Page
Loading...
