Why is fluid dripping from the bottom of the cup of my DeVilbiss Paint Sprayer?
If fluid is dripping or leaking from the bottom of the cup of your DeVilbiss Paint Sprayer, it could be because the cup is loose on the gun. Tighten it. Another cause could be a dirty cup fluid inlet seat; clean it.
General| Brand | DeVilbiss |
|---|---|
| Model | GTIPRO LITE |
| Category | Paint Sprayer |
| Language | English |
Warnings regarding flammable materials, combustible substances, and static electricity precautions.
Recommendations for respiratory, eye, and hand protection during spraying and cleaning operations.
Guidance on correct usage, pressure limits, and avoiding hazardous misuse of the spray gun.
Information on potential sound levels and recoil forces, advising on hearing protection.
Diagram illustrating the assembly of spray gun components with reference numbers.
Instructions for servicing the air valve, including disassembly and seal replacement procedures.
Procedure for replacing needle packing and associated components for proper gun function.
Guidance on replacing the spreader valve assembly and its internal seal.
Steps for removing and replacing the fluid inlet seal and adaptor.
Detailed instructions for replacing the seal within the spray head assembly.
Procedure for cleaning and maintaining the suction cup lid and its diaphragm.
To Next Page
