DeVilbiss PRI Pro Lite - Specifications; Air Inlet Pressures

EN
P1 = 1/4"
P2 = 3/8"
Trigger
GUN ONLY
L x H x W mm
SPECIFICATIONS
CONNECTIONS
ENVIRONMENTAL
Max Ambient Operating Temperature
BSP
Seals and O-Rings
2.0 Bar [29 psi]
Seals and O-Rings
Air Cap Retaining Ring, Sprayhead, Adjusting Knobs
Air Inlet, Valve Body, Housing, Packing Nut
WITH CUP
FUNCTIONAL DESCRIPTION
WEIGHT
MATERIALS OF CONSTRUCTION
Anodised Aluminium
40°C Nominal [104°F]
The PRi PRO Lite spray gun is a professional quality gun designed with EPA compliant, High Efficiency
technology. High Efficiency complies with EPA by obtaining transfer efficiency above 65%.
AIR INLET PRESSURES
Gun Body Material
Gun Air Inlet Pressure with gun triggered
Air Cap Material
Air Valve Stem
Electroless Nickel Plated Brass
Max Static Air Input Pressure
P1 =
12 Bar [175 psi]
Air Cap Retaining Ring, Sprayhead, Adjusting Knobs
446g
Air Valve Stem
Vibration Level:
Sound Pressure Level:
Available on request
Available on request
Sound Power Level:
<2.5 m/s²
629g
Fluid Tip, Fluid Needle and Trigger Stud
Fluid Inlet Size
Universal
Air Cap Retaining Ring, Sprayhead, Adjusting Knobs
Air Cap Material
Springs, Clips, Screws
Air Inlet Size
Air Inlet, Valve Body, Housing, Packing Nut
Chrome plated brass
DIMENSIONS
186 x 317 x 108
SB-E-2-859 R1.1
2/24