DeVilbiss PRI Pro Lite - Earthing and Static Prevention

EN
-
1
1
+52
1
GTI-428-K5
The spray gun must be earthed to dissipate any electrostatic charges which may be created by fluid
or air flows. This can be achieved through the spray gun mounting, or conductive air/fluid hoses.
Electrical bond from the spray gun to earth should be checked and a resistance of less than 10⁶ Ohms
is required.
AIR VALVE SERVICE TOOL
WARNING
1
DRIP CHECK LID (KIT OF 5)
BLACK (UV ONLY)
GRAVITY CUP KIT
50
GFC-422
GFC-515
GRAVITY CUP LID
BLACK (UV ONLY)
PRO-406-K
-
FILTER (KIT OF 5)
48
GRAVITY CUP LID
GRAVITY CUP
1
GFC-402
1
SPREADER VALVE ASSEMBLY
47
-
PRO-470
TORX DRIVER (KIT OF 2)
SPN-8-K2
45
1
1
1
-
KGP-5-K5
VALVE BODY
SPREADER VALVE ADJUSTING KNOB
46
SP-617-CR-K
1
TRIGGER STUD
1
1
49
51
SERVICE PARTS
GRAVITY CUP KIT
53
TOOL KIT
1
54
NOT INCLUDED IN THE GUN KIT, ONLY WITH REF 22
+
1
1
TRIGGER STUD & SCREW KIT
GFC-501
-
44
SEAL AND PIN KIT, KIT OF 5 (ITEMS 32, 34 & 36)
SPRAY GUN REPAIR KIT (INCLUDES ITEMS MARKED *)
SN-406
GFC-2-K5
*42
43
1
SN-9-K
TRIGGER
COLOUR ID RING KIT (4 COLOURS)
REF.
1
-
39
AIR INLET
1
*40
38
SN-26-K4
PART No.
PARTS LIST (Continued)
DESCRIPTION
QTY.
41
TRIGGER SCREW
-
1
SB-E-2-859 R1.1
8/24