DeVilbiss Pro Lite E - Disassembly of Tip and Needle Assembly; Fluid Tip and Needle Replacement Guidance; Handling Precautions for Tip;Needle

EN
DISASSEMBLY TIP & NEEDLE
NOTE
When replacing the fluid tip or fluid needle, replace tip, needle and fluid packing at the same time.
Using worn parts can cause fluid leakage. Do not overtighten.
CAUTION
To prevent damage to fluid tip or fluid needle, be sure to either:
1. Pull the trigger and hold while tightening or loosening the fluid tip, or,
2. Remove the fluid adjusting knob to relieve spring pressure against needle collar.
SB-E-2-855 R1.0
11/24