To Next PageTo Next PageWhat to do if my DeVilbiss Medical Equipment pump runs, but there is no vacuum?
If the pump is running but no vacuum is being created, verify that all tubing is properly connected. Inspect tubing connections for any breaks, leaks, or occlusions. Make sure the float shut-off hasn't been activated because the container is full. Also, check the container assembly for leaks or cracks.
What to do if my DeVilbiss Vacu-Aide 7310 Medical Equipment battery will not hold a charge?
If the battery isn't holding a charge, first confirm the battery is connected. Verify that the charge light turns on. Check all electrical connections during charging. Ensure the wall outlet is live by plugging in a lamp.
Why is there low vacuum in my DeVilbiss Vacu-Aide 7310?
If you are experiencing low vacuum, try using the vacuum adjustment knob to increase the vacuum level. Also, check the system for any leaks.
General| Type | Portable Suction Unit |
|---|---|
| Collection Bottle Capacity | 800 ml |
| Power Source | AC/DC |
| Battery | Rechargeable |
| Battery Life | 60 minutes at typical settings |
Guides users on adjusting the vacuum level using the regulator knob and reading the LED display.
Instructions on how and when to change the bacteria filter and replace the collection container.
