DeVilbiss IntelliPAP 2 Series User Manual

DeVilbiss IntelliPAP 2 Series: Singl
e Battery Connection
BATTERY POWER SOLUTIONS
Page 1 of 2 January 2018
REQUIRED COMPONENTS
 Freedom
TM
CPAP Battery Kit
 150W Sine Wave Power Inverter (inverter)
CONNECTION INSTRUCTIONS
 Plug the DC input cord into the DC OUT jack of the battery.
 Plug the inverter into the DC input cord.
 Plug the AC power cord of the PAP device into the inverter.
 Turn the PAP device on and it should begin functioning.
 The digital display screen will show the charge level of the battery. You may press the charge level indicator
button to illuminate this screen. It will stay illuminated for a few seconds at a time.
 When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.

PLUG IN PAP DEVICE
AC POWER SUPPLY

DC INPUT CORD

150W SINE WAVE
POWER INVERTER

DC OUT JACK
The inverter can also be used to charge the battery in a vehicle (vehicle does not need to be running) and to power/charge
other small electronic devices with the
battery. The inverter is not proprietary to the Freedom
TM
CPAP Battery and can be
used with other external batteries.
OPTIONAL FREEDOM
TM
CPAP BATTERY CHARGING ACCESSORIES


 Auto Charge DC Cable {BPS DC.CABLE}: Used to charge the battery in a vehicle (vehicle must be running).


 SunPower 40W Solar Panel {BPS SP40}: Used to charge the battery using the power of the sun.

DeVilbiss IntelliPAP 2 Series Specifications

General

Brand	DeVilbiss
Model	IntelliPAP 2 Series
Category	Medical Equipment
Language	English

Summary

Single Battery Connection

Required Components for Single Battery

Lists the essential components for connecting a single battery to the CPAP device.

Connection Instructions for Single Battery

Step-by-step guide to connect the battery, inverter, and PAP device for single battery operation.

Optional Charging Accessories

Details optional accessories like DC cables and solar panels for charging the battery.

Dual Battery Connection

Required Components for Dual Battery

Lists the essential components for connecting two batteries to the CPAP device.

Connection Instructions for Dual Battery

Step-by-step guide to connect two batteries, a pigtail cord, inverter, and PAP device.

Optional Charging Accessories for Dual Battery

Details optional accessories for charging the batteries, similar to single battery setup.