Devolo dLAN 200 - Removing a dLAN 200 AV USB extender from a network; dLAN Cockpit and dLAN 200 AV USB extender

22 dLAN network
devolo dLAN 200 AV USB extender
Removing a dLAN 200 AV USB extender from a
network (Fig. 3)
To remove a dLAN 200 AV USB extender adapter from
an existing network, press its encryption button for at
least 10 seconds. The device will be assigned a new
randomly generated password and will thus no longer
be able to access the network. To integrate the device
into a different dLAN 200 AV network, follow the steps
described above, depending on whether you are set-
ting up a new network or adding the adapter to an ex-
isting one.
fig. 3