22 dLAN network
devolo dLAN 500 AV Wireless+
Removing a dLAN 500 AV Wireless+ from a net-
work (Fig. 7)
To remove a dLAN 500 AV Wireless+ adapter from an
existing network, press its encryption button for at
least ten seconds. The device will be assigned a new
randomly generated password and will thus no longer
be able to access the network. To integrate the device
into a different dLAN network, follow the steps de-
scribed above, depending on whether you are setting
up a new network or adding the adapter to an existing
one.
To Next Page
Loading...
