Devolo dLAN 550 WiFi Manual

Network configuration 35
devolo dLAN 550 WiFi
In a dLAN network, all connected components
must use the same password. This can be assigned
in different ways:
b Using devolo Cockpit or the
devolo Home Network App (see Chapter 3.4
Installation of devolo software),
b Only using the PLC button (see Chapter 2.4.1
PLC button and 3.3 Connecting the
dLAN 550 WiFi)
b Using the web interface, in the PLC menu
Powerline Settings:
Powerline Password
You can also assign your network a custom PLC
password you pick yourself. Enter this password for
each dLAN adapter in the Network password field
and confirm your settings by clicking the Disk icon.
Note that the custom password is not assigned
to the whole PLC network automatically. In-
stead, you must assign it separately to each of
your dLAN adapters.
4.5.1Add device
Using the encryption (PLC) button
If you would like to manually add a new dLAN de-
vice, press the encryption button within 2 minutes
on the device which you want to join your Powerli-
ne network and confirm with Start configuration.

Devolo dLAN 550 WiFi Specifications

General

WiFi standard	802.11n
WiFi speed	300 Mbps
Powerline speed	500 Mbps
Ethernet ports	1
Encryption	128-bit AES
Type	Powerline Adapter
Wireless Standard	802.11n
Frequency Band	2.4 GHz
Security	WPA/WPA2
Operating Voltage	100-240 V
Operating Frequency	50/60 Hz
Weight	150 g
Range	300 m
Ports	1 x Ethernet