Devolo Magic 2 LAN triple User Manual

33 Network configuration
devolo Magic 2 LAN triple
To do so, enter the desired new password twice.
The web interface is now protected against un-
authorized access with your custom password!
Identify Device
The devolo Magic adapter can be located using the
Identify device function. Click Identify to make
the white LED for the corresponding adapter flash
for 2 minutes to make it easier to identify by sight.
LED
Enable the LED disabled option if the LED on the
devolo Magic adapter is intended to be switched
off for normal operation. An error status is indica-
ted by corresponding flashing behaviour regard-
less of this setting.
Powersaving
If powersaving mode is enabled, the
devolo Magic 2 LAN triple switches to powersa-
ving mode automatically whenever it detects re-
duced data transmission over Ethernet.
The latency (time for transmitting a data
packet) may be negatively affected.
Powersaving mode is disabled in the
devolo Magic 2 LAN triple factory default settings.

Devolo Magic 2 LAN triple Specifications

General

Type	Powerline Adapter
Maximum Data Transfer Rate	2400 Mbps
Ports	3x Gigabit Ethernet
Encryption	128-bit AES
Standard	HomePlug AV2
Model	Magic 2 LAN triple
Manufacturer	Devolo
Wi-Fi	No
Dimensions	152 x 76 x 40 mm
Weight	290 g
Operating Temperature	0°C to 40°C
Compatibility	Works with all Devolo Magic series adapters
Range	500 meters over powerline
Ethernet Speed	10/100/1000 Mbps
Plug Type	EU, UK, US (varies by region)
Operating Humidity	10% to 90% non-condensing