Control commands
|
|
devolo MicroLink ISDN i
|
14
EN
The complete AT command set can be found in the next chapter 'AT com-
mands: Detailed description'.
\V0
\V1
\V2
\V8
No modified CONNECT messages
Identification of connections with error correction
Additional distinction of correction processes
Detailed CONNECT messages
&W Save configuration profile
*W Save complete configuration profile
X0
X1
X2
X3
X4
Busy signal returns NO CARRIER
Busy signal returns NO CARRIER
Busy signal returns NO CARRIER
Busy signal returns BUSY
Busy signal returns BUSY
\X0
\X1
XON/XOFF characters are not sent
XON/XOFF characters are sent
&Y Set pointer to configuration profile
Zn Load configuration profile
&Z Store dial number
AT.m=x
AT.m?
ATSn.m=x
Sets the bit m to the value x (m = 0 to 7; x = 0 to 1)
Reads the value of bit m
Sets bit m in S register n to value x (m = 0 to 7; x = 0 to 1)
=? Query of the value range of a command
Command Meaning
To Next Page
Loading...
