Devolo MicroLlink - Page 36

AT commands: Detailed description
|
|
devolo MicroLink ISDN i
|
36
EN
S1 Counter for messages for a pending call
Register S1 contains the number of messages for a pending call ('RING' every
5 seconds). The S1 value is reset to 0 when the call is answered or is no
longer pending.
S2 Escape code characters
The escape command '+++', which is used to switch from the transfer phase
to the command phase, can be changed in register S2.
The transition to the command phase is blocked by values >127.
S3 Carriage return characters
The character for M can be redefined in register S3.
Valid values 0 to 255 RING signals
Default value 0
Store in nonvolatile memory no
Valid values 0 to 255 decimal
Default value 43 (+)
Store in nonvolatile memory AT*W
Valid values 0 to 127 decimal
Default value 13 (carriage return)
Store in nonvolatile memory AT*W