|
AT commands: Detailed description
37
|
devolo MicroLink ISDN i
|
EN
S4 Line-feed character
The line-feed character can be redefined in register S4.
S5 Backspace character
The backspace character can be redefined in register S5.
S12 Escape prompt delay
The length of the escape prompt delay is established in register S12.
S14 Bit-oriented option
The contents of register S14 is stored in the nonvolatile memory with the
commands AT&W or AT*W. The individual bits have the following signifi
-
cance:
Valid values 0 to 127 decimal
Default value 10 (line feed)
Store in nonvolatile memory AT*W
Valid values 0 to 32, 127 decimal
Default value 8 (backspace)
Store in nonvolatile memory AT*W
Valid values 0 to 255 (1/50 sec.)
Default value 50 (1 sec.)
Store in nonvolatile memory AT*W
Bit Dec. Description Command
0 0 0 Reserved
1 0 0 No command echo to host ATE0
2 1 Command echo to host ATE1
To Next Page
Loading...
