AT commands: Detailed description
|
|
devolo MicroLink ISDN i
|
40
EN
S30 Inactivity timer
In the S30 register you can set the time period after which the MicroLink
ISDN i automatically terminates the connection if no data is sent or received
in the meantime. The value 0 switches the inactivity timer off.
S31 Bit-oriented option
The contents of register S31 is stored in the nonvolatile memory with the
commands AT&W or AT*W. The individual bits have the following signifi
-
cance:
S51 Bit-oriented option
The contents of register S51 is stored in the nonvolatile memory with the
commands AT&W or AT*W. The individual bits have the following signifi
-
cance:
Valid values 0 to 255 (10 sec.)
Default value 0 (timer off)
Store in nonvolatile memory AT&W or AT*W
Bit Dec. Description Command
0..4 0 0 Reserved
5 0 0 DTR dialing off AT$D0
32 1 DTR dialing on AT$D1
6..7 0 0 Reserved
Bit Dec. Description Command
0..3 0 0 No handshake AT\Q0
1 1 XON/XOFF bidirectional AT\Q1
2 2 RTS/CTS unidirectional AT\Q2
3 3 RTS/CTS bidirectional AT\Q3
4 4 XON/XOFF unidirectional AT\Q4
4 0 0 XON/XOFF characters are not sent AT\X0
To Next Page
Loading...
