|
AT commands: Detailed description
47
|
devolo MicroLink ISDN i
|
EN
S157 Sending packet retransmissions on
D channel
Register S157 contains the number of transmit repetitions required in the sig-
naling channel (D channel) for every 250 data packets. This register can be
read only. The contents of this register can only be reset by switching the
adapter off and back on.
S158 Current/previous B channel
Register S158 describes which B channel is currently in use, or which one
was used last. This register can be read on
.
S159 Status of the S
0
interface
Register S159 contains the current status of the ISDN S
0
interface. This reg-
ister can be read only.
Valid values 0 to 255 1/250 data packets
Default value 0
Store in nonvolatile memory No
S158 Description
000
001
002
No connection has been established
Current/previous connection on B channel 1
Current/previous connection on B channel 2
Bit Dec. Description
0..1 0 0 Reserved
2 0 0 S
0
bus not activated
4 1 S
0
bus activated
3 0 0 No TEI assigned
8 1 TEI is assigned
To Next Page
Loading...
