AT commands: Detailed description
|
|
devolo MicroLink ISDN i
|
48
EN
S160 Call signaling information
Register S160 contains information on the last call present at the ISDN S
0
interface. This register can be read only.
4 0 0 D channel level 2 not established
16 1 D channel level 2 is established
5..7 0 0 Reserved
Bit Dec. Description
Dec. Hex. Description
000 00h No call was pending
016 10h Call currently being signaled
017 11h Call answered
018 12h Call attempt ended or answered by another device on the S
0
bus
032 20h Call had incorrect Service Indicator (1TR6) or incorrect Bearer Capa-
bility (DSS1)
033 21h Call had incorrect EAZ or incorrect MSN/DN
048 30h DTR (line S1) was in off-state, call was ignored
049 31h ISDN adapter had another connection or establishing another con-
nection (BUSY)
064 40h Dial number monitoring not in order
065 41h Dial number monitoring not in order, no number specified
To Next Page
Loading...
