Network configuration 44
devolo WiFi 6 Repeater 3000
tion keys and establish a secure Wi-Fi connec-
tion. The Wi-Fi LED on the front panel indicates
the synchronisation process by flashing.
WPS via PIN
To interconnect Wi-Fi devices in your wireless net-
work securely using a PIN variant, go to the web in-
terface and, under Wi-Fi WPS WPS PIN, enter
the WPS PIN generated by your Android smart-
phone or tablet and start the encryption process by
pressing the corresponding Start button.
Use of the WPS method implies the use of the
WPA/WPA2 or WPA2 or WPA3/WPA2
encryption standard.
When the WPA3 encryption standard is
enabled, the WPS function is not available for
technical reasons.
For more information of the encryption
standards, refer to Chapter 4.5.3 Wi-Fi net-
works.
Therefore take note of the following automatic
settings:
b If under Wi-Fi Wi-Fi networks, the No
encryption option is selected in advance,
WPA2 is set automatically. The newly genera-
ted password is displayed under Wi-Fi Wi-Fi
networks in the Key field.
b If under Wi-Fi Wi-Fi networks, the WPA/
WPA2 option is selected in advance, this set-
ting remains with the previously assigned
password.
WiFi_6_Repeater_3000.book Seite 44 Freitag, 3. Juni 2022 2:06 14
To Next Page
Loading...
