Network configuration 48
devolo WiFi 6 Repeater 3000
tect yourself against possible changes. Simply
disable the Enable Wi-Fi button option.
The operating button is enabled in the
WiFi 6 Repeater 3000 factory default settings.
Under Time zone, you can select the current time
zone, e.g. Europe/Berlin. The Time server (NTP)
option lets you specify a time server. A time server
is a server on the Internet whose task consists of
providing the exact time. Most time servers are
coupled with a radio clock. Select your time zone
and time server; the WiFi 6 Repeater 3000 auto-
matically switches between standard time and
summer time.
4.7.3Configuration
Saving the device configuration
To save the enabled configuration to your compu-
ter as a file, select the corresponding button in the
System Configuration Save Configuration
to File area. The system starts downloading the
current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the
WiFi 6 Repeater 3000 in the System Configura-
tion area and enabled there. Select a suitable file
via the Select file ... button and start the operation
by clicking the Restore button.
Factory Settings
The WiFi 6 Repeater 3000 is reset to the original
factory defaults in the System Configuration
area with the Factory Reset option.
Doing so causes you to lose your personal
Wi-Fi settings. The last-assigned passwords
for the WiFi 6 Repeater 3000 are also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as a file and reloaded into the
WiFi 6 Repeater 3000. This function can be useful
WiFi_6_Repeater_3000.book Seite 48 Freitag, 3. Juni 2022 2:06 14
To Next Page
Loading...
