49 Network configuration
devolo WiFi 6 Repeater 3000
for creating a variety of configurations that will let
you quickly and easily set up the device for use in
different network environments.
Reboot device
In order to reboot the WiFi 6 Repeater 3000, select
the Reboot button in the System Configurati-
on area.
4.7.4Firmware
The firmware of the WiFi 6 Repeater 3000 includes
the software for operating the device. If necessary,
devolo offers new versions on the Internet as a file
download, for example to modify existing functi-
ons.
Current firmware
The currently installed firmware of the
WiFi 6 Repeater 3000 is displayed here.
Searching for and updating firmware
automatically
The adapter
can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The WiFi 6 Repeater 3000 lets you know
when a new firmware version becomes
available. The option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The WiFi 6 Repeater 3000 automatically up-
dates its firmware. The option is enabled by
default.
Download updated firmware
1 If you have downloaded an updated firm-
ware file for the WiFi 6 Repeater 3000 to
your computer, navigate to the System
Firmware Update firmware area. Click
Browse … and select the downloaded file.
2 Confirm the update procedure with Update
firmware. After a successful update, the
WiFi 6 Repeater 3000 restarts automatically.
Ensure that the update procedure is not inter-
rupted.
4.7.5Config Sync
This menu is available in access point mode
only.
WiFi_6_Repeater_3000.book Seite 49 Freitag, 3. Juni 2022 2:06 14
To Next Page
Loading...
