DeWalt D28715 Manual

ENGLISH
11
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Optional Accessories
WARNING: Since accessories, other
than those offered by DEWALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only DEWALT recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Use only high-strength Type 1 organic bonded
wheels rated 4100 rpm or higher.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your DEWALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
DEWALT provides a facility for the collection and
recycling of DEWALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
EWALT office at the address indicated in this
manual. Alternatively, a list of authorised DEWALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.

DeWalt D28715 Specifications

General

Product type	Standard miter saw
Cutting capacity 0°	130 mm
Power consumption (typical)	1350 W
Bevel type	Single bevel
Table saw mode	-
Idle speed (max)	4000 RPM
Sound pressure level	112 dB
Sound level uncertainty	3, 100 dB
Cross cut capacity (0° x 0°)	140 x 140 mm
Compound cut capacity (45° x 45°)	120 x 120 mm
Input power	2200 W
Power source	AC
Blade diameter	355 mm
Blade thickness	2.5 mm

Weight and Dimensions

Width	520 mm
Height	435 mm
Weight	18000 g