EasyManuals Logo

DeWalt D28715 Manual

DeWalt D28715
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
ENGLISH
4
HEAVY-DUTY 355 mm (14") CHOP SAW WITH
QUICK-CHANGE CLAMP D28715
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
D28715
Voltage V
AC
220/240
120
Type 2
Power Input W 2200
No-load speed min
-1
4000
Min. peripheral speed
cutting disc m/s 80
Disc diameter mm 355
Disc bore mm 25.4
Disc body thickness mm 3.1
Type of cutting disc straight,
non-recessed
Cross-cutting capacity at 90˚
circular mm 130
square mm 120 x 120
rectangular mm 100 x 200
angular mm 140 x 140
Cross-cutting capacity at 45˚
circular mm 130
square mm 110 x 110
rectangular mm 100 x 140
angular mm 120 x 120
Weight kg 18.5
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
Safety Instructions
When using power tools, always observe the safety
regulations applicable in your country to reduce the
risk of fire, electric shock and personal injury.
Read all of this manual carefully before operating the
tool.
SAVE THIS MANUAL FOR FUTURE REFERENCE
General Safety Rules
1. Keep work area clean.
Cluttered areas and benches can cause
accidents.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit (250 - 300 Lux). Do not use the tool
where there is a risk of causing fire or explosion,
e.g., in the presence of flammable liquids and
gases.
3. Keep children away.
Do not allow children, visitors or animals to
come near the work area or to touch the tool or
the mains cable.
4. Dress properly.
Do not wear loose clothing or jewellery, as these
can be caught in moving parts. Wear protective
hair covering to keep long hair out of the way.
When working outdoors, preferably wear
suitable gloves and non-slip footwear.

Other manuals for DeWalt D28715

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt D28715 and is the answer not in the manual?

DeWalt D28715 Specifications

General IconGeneral
Product typeStandard miter saw
Cutting capacity 0°130 mm
Power consumption (typical)1350 W
Bevel typeSingle bevel
Table saw mode-
Idle speed (max)4000 RPM
Sound pressure level112 dB
Sound level uncertainty3, 100 dB
Cross cut capacity (0° x 0°)140 x 140 mm
Compound cut capacity (45° x 45°)120 x 120 mm
Input power2200 W
Power sourceAC
Blade diameter355 mm
Blade thickness2.5 mm
Weight and Dimensions IconWeight and Dimensions
Width520 mm
Height435 mm
Weight18000 g

Related product manuals