DeWalt DC410 - Important Safety Instructions for Battery Packs; Battery Handling, Charging, and Storage

21
ENGLISH
CORDLESS ANGLE GRINDER DC410
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical data
DC410
Voltage V
DC
18
Power output W 340
No-load speed min
-1
7,000
Wheel diameter mm 115
Spindle diameter M14
Weight (without battery pack) kg 1.9
Battery pack DE9095 DE9039
Voltage V
DC
18 18
Capacity Ah 2.0 3.0
Weight kg 1.0 1.0
Charger DE9116
Mains voltage V
AC
230
Charging time min 60
Weight kg 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DC410
DEWALT declares that these Power Tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 50260,
EN 60335, EN 55014-2, EN 55014-1,
EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
DC410
L
pA
(sound pressure) dB(A)* 85
L
WA
(acoustic power) dB(A) 94
* at the operator’s ear
Take appropriate measures for the
protection of hearing.
Weighted root mean square acceleration value
according to EN 50144:
DC410
4.9 m/s
2
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany