DeWalt DCV586M User Manual

10
ENGLISH
Markings on Dust Extractor
The following pictograms are shown on the dust extractor:
Read instruction manual beforeuse.
Pairingsymbol.
Ø
20
Ø
32
Hose diameter switchpostions.
Acoustic alarm
Low battery alarm
<20m/s
Flow rate alarm

WARNING: This machine contains dust hazardous to
health. Emptying and maintenance operations, including
removal of the dust collection means, must only be carried
out by authorised personnel wearing suitable personal
protection. Do not operate without the full filtration
systemfitted.
Class M dust extractors are suitable to extract dry, non-
combustable dusts with workpace limit values of ≥ 0.1 mg/m³.
Date Code Position (Fig. A)
The date code
22
, which also includes the year of manufacture,
is printed on top housing underhandle.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the dust extractor or any part of
it. Damage or personal injury couldresult.
1
Battery port
2
Dust extractor hose
3
Three position switch
4
Tank latches
5
Hose clips
6
Dust extractor head
7
Battery pack
8
Hose release latch
9
Hose inlet plug
10
TSTAK stacking latches
11
Wireless Tool Control
pairing button
12
Fleece bag
13
Handle
14
Wireless Tool Control
remote
15
Hose selection switch
Intended Use
This industrial dust extractor cleaner is intended for wet and dry
vacuum cleaningapplications.
The appliance can operate cordless by using the
DeWALT
54V
Li-ionbatteries.
The dust extractor can be used with a
DeWALT
TSTAK transport
system or as a stand alone unit on thefloor.
The DCV586M is suitable for picking up dry and non-flammable
dusts, liquids, wood chips, mineral dusts containing quartz and
hazardous dusts with exposure limit values (e.g. MAK or AGW
values) greater than or equal to 0.1 mg/m³ (dust class M as per
IEC/EN60335-2-69).
DO NOT pick up materials that present a risk of explosion,
glowing or burning materials, flammable materials, gases or
other hazardoussubstances.
DO NOT suck up oil, liquids with a temperature of over 32°C,
aggressive or flammableliquids.
DO NOT use the dust extractor in explosiveatmospheres.
DO NOT use the dust extractor without dustbag.
NOTE: This appliance is suited for professional and commercial
use, e.g. in hotels, schools, hospitals, factories, shops, offices,
rental companies, and on constructionsites.
DO NOT let children come into contact with the dust extractor.
Supervision is required when inexperienced operators use
thisdust extractor.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills.
Children should never be left alone with thisproduct.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn dust extractor off and disconnect battery
pack before making any adjustments or removing/
installing attachments or accessories and if the
dust extractor head is removed from the tank or
not latched securely. An accidental start-up can
causeinjury.

WARNING: Use only
DeWALT
battery packs andchargers.
Installing and Removing the Battery Pack
(Fig. B)
NOTE: Make sure your battery pack
7
is fullycharged.
1. To install the battery pack into the vaccum, insert/slide
battery pack into battery port
1
. Make sure the battery pack
is fullyseated.
2. To remove the battery pack from the dust extractor,
press and hold the battery release
23
on the battery
pack and remove. To charge the pack, insert it into your
DeWALT
charger.

DeWalt DCV586M Specifications

General

Brand	DeWalt
Model	DCV586M
Category	Vacuum Cleaner
Language	English