ENGLISH
CROSS-CUT MITRE SAW DW700
Congratulations!
You have chosen a DEWALT product. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 3
Mains plug replacement en - 3
Using an extension cable en - 3
Assembly en - 4
Adjustment en - 4
Instructions for use en - 5
Transporting en - 7
Maintenance en - 7
Guarantee en - 7
Technical data
DW700
Voltage V 230
(U.K. & Ireland only) V 230/115
Motor power (input) W 1,200
Motor power (output) W 800
Blade diameter mm 216
Blade bore mm 30
Max. blade speed min
-1
7,000
Mitre (max. positions) left and right 45°
Bevel (max. position) left 45°
Compound mitre bevel 45°
mitre 45°
Capacities
cross-cut 90° mm 254 x 52
mitre 45° mm 175 x 52
bevel 45° mm 254 x 40
Overall dimensions mm 540 x 440 x 360
Weight kg 12.5
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
DW700
DEWALT declares that these Power Tools have been designed in
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 50144,
EN 55104, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the address below,
or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to EN 50144:
DW700
L
pA
(sound pressure) dB(A)* 90.6
L
WA
(acoustic power) dB(A) 98.6
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to EN 50144:
DW700
< 2.5 m/s
2
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Cert. No.
AM 9511299 01
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
15 en - 1
To Next Page
Loading...
