Power Supply
Be sure your power supply agrees with the nameplate marking.
A voltage decrease of more than 10% will cause a loss of power
and overheating.
Switch
To start the tool, depress the trigger switch shown in Figure 1. To
turn the tool off, release the switch.
Features and Benefits
• AC/DC permits use with a DC power source such as a welder.
• Switch handle is human engineered for maximum
convenience when the saw is used on a bench, or on the floor.
• Lightweight, sure-grip carrying handle, and fold-down design
combine to make it easy to carry the machine from job to job.
• Rugged steel base with rubber padded feet provide durability
and vibration-free operation for stable cutting.
• Pivoting fence for convenience and accuracy in making miter
cuts. Right position graduations for 0°, 15°, 30° and 45°. Left
position graduations for 0°, 15° and 30°.
• Blade spindle lock simplifies and speeds blade changing.
• Blade/Fence wrench is conveniently stored in holder at rear
of base.
• Tough steel wheel guard protects operator from the wheel.
Spark guard in base minimizes escaping sparks and protects
surroundings.
• Heavy duty brush system extends brush life.
• High efficiency cooling fan and improved housing design
assure high airflow for cooler operation and long life.
• 8’ power supply cord with separate cord protector is
convenient and simplifies servicing.
• 100% ball and roller bearing construction for longer tool life.
Removal and Installation of Wheels
1. Be sure tool is disconnected from power supply.
2. Push in blade lock lever (Fig. 1) and rotate wheel by hand until
blade lock lever engages slot in inside flange to lock wheel.
Loosen the hex head bolt in the center of the abrasive wheel
4
To Next Page
Loading...
