5
ENGLISH
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
D
EWALT one of the most reliable partners for professional power toolusers.
ANGLE GRINDERS
DWE4016
Technical Data
DWE4016
Voltage V
AC
230
UK & Ireland V
AC
230/115
Type
Power input W 750
No-load/rated speed min
-1
11 000
Wheel diameter mm 115
Grinding Wheel thickness mm 6
Wheel Type 27
Spindle diameter M14
Weight kg 1.8
Noise values and vibration values (triax vector sum) according to
EN60745-2-3:
L
PA
(emission sound pressure level) dB(A) 86
L
WA
(sound power level) dB(A) 97
K (uncertainty for the given sound level) dB(A) 3
Surface grinding
Vibration emission value a
h,AG
= m/s
2
5.1
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment ofexposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase
the exposure level over the total
workingperiod.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
workingperiod.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of workpatterns.
Fuses:
Europe 230V tools 10 Amperes, mains
U.K. & Ireland 230V tools 13 Amperes, in plugs
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to thesesymbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or seriousinjury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or seriousinjury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice
not related to personal injury
which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.