DeWalt DWE4016 User Manual

9
ENGLISH
Wear earprotection.
Wear eyeprotection.
DATE CODE POSITION (FIG. 1)
The date code (E), which also includes the year of
manufacture, is printed into thehousing.
Example:
2015 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Angle grinder
1 Guard
1 Side handle
1 Flange set
1 Hex key
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
duringtransport.
• Take the time to thoroughly read and
understand this manual prior tooperation.
Description (Fig. 1)
WARNING: Never modify the power
tool or any part of it. Damage or personal
injury couldresult.
A. On/off switch
B. Spindle lock button
C. Guard
D. Side handle
INTENDED USE
Your DWE4016 angle grinder has been designed for
professional grindingapplications.
DO NOT use under wet conditions or in the
presence of flammable liquids orgases.
These heavy-duty angle grinders are professional
powertools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use thistool.
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons withoutsupervision.
which the power tool was not designed cannot
be adequately guarded and areunsafe.
b) The grinding surface of centre depressed
wheels must be mounted below the plane
of the guard lip. An improperly mounted wheel
that projects through the plane of the guard lip
cannot be adequatelyprotected.
c) The guard must be securely attached to the
power tool and positioned for maximum
safety, so the least amount of wheel is
exposed towards the operator. The guard
helps to protect the operator from broken wheel
fragments, accidental contact with wheel and
sparks that could igniteclothing.
d) Wheels must be used only for recommended
applications. For example: do not grind with
the side of cut-off wheel. Abrasive cut-off
wheels are intended for peripheral grinding, side
forces applied to these wheels may cause them
toshatter.
e) Always use undamaged wheel flanges
that are of correct size and shape for your
selected wheel. Proper wheel flanges support
the wheel thus reducing the possibility of wheel
breakage. Flanges for cut-off wheels may be
different from grinding wheelflanges.
f) Do not use worn down wheels from larger
power tools. Wheel intended for larger power
tool is not suitable for the higher speed of a
smaller tool and mayburst.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA orless.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment ofhearing.
– Risk of personal injury due to flyingparticles.
– Risk of burns due to accessories becoming hot
duringoperation.
– Risk of personal injury due to prolongeduse.
– Risk of dust from hazardoussubstances.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Spanner

DeWalt DWE4016 Specifications

General

Brand	DeWalt
Model	DWE4016
Category	Grinder
Language	English