DeWalt DWE4887 - Assembly and Adjustments Safety; Pre-Assembly Disconnection

34
English
FIG. 1
B
E
D
A
C
G
F
INTENDED USE
The DWE4887 heavy-duty die grinder has been designed for
professional grinding.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This heavy-duty die grinder is a professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of injury, turn unit off and
disconnect it from power source before installing and removing
accessories, before adjusting or when making repairs. An
accidental start-up can cause injury.
WARNING: Prior to assembly and adjustment, always unplug tool.
V ................... volts A ...................... amperes
Hz ................. hertz W .....................watts
min ............... minutes
or AC ..........alternating
or DC ... direct current current
.................Class I Construction or AC/DC ...alternating
.....................
(grounded) ........................or direct
................. Class II Construction current
(double insulated)
n
o ....................no load
…/min .......... revolutions per minute ....................... speed
BPM ............. beats per minute
n ......................rated
IPM ............... impacts per minute
........................speed
SPM ............. strokes per minute
.....................earthing
sfpm ............. surface feet terminal
..................... per minute ..................... safety alert
..................... symbol
DESCRIPTION (Fig. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Paddle switch
B. Lock-on button
C. Lock-off lever
D. Spindle
E Collet nut
F. Small spanner (13 mm)
G. Large spanner (17 mm)