DeWalt DWE7485-QS - Optional Accessories; Protecting the Environment

17
ENGLISH
Protecting the Environment
Separate collection. Products marked with this symbol
must not be disposed of with normal householdwaste.
Products contain materials that can be recovered
or recycled reducing the demand for raw materials.
Please recycle electrical products according to local provisions.
Further information is available at www.2helpU.com.
Replace blade guard when worn. Contact your local
DeWALT
service centre for details on a blade guardreplacment.
SAW BLADES: ALWAYS USE 210 mm noise reduced saw blades
with 30 mm arbour holes. Blade speed rating must be at least
6000 RPM. Never use a smaller diameter blade. It will not be
guardedproperly.
BLADE DESCRIPTIONS
Application Diameter Teeth
Construction Saw Blades(fast rip)
General Purpose 210 mm 24
Fine Crosscuts 210 mm 40
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts 210 mm 60
Optional Accessories

WARNING: Since accessories, other than those offered
by
DeWALT
, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only
DeWALT
recommended
accessories should be used with thisproduct.
Consult your dealer for further information on the
appropriateaccessories.