To Next PageTo Next PageWhat to do if my DeWalt DXAEC2CA Battery Charger is not charging?
If your DeWalt Battery Charger isn't charging, first ensure it's properly connected to a live AC outlet. Also, verify that the correct voltage setting has been selected for the battery you're charging. Note that if the battery's voltage has dropped below 2 volts, this charger won't be able to recharge it.
General| Product Type | Battery Charger |
|---|---|
| Input Voltage | 120V AC |
| Output Voltage | 12V DC |
| Compatibility | 12V Batteries |
| Charging Time | Varies based on battery size and condition |
| Features | Battery reconditioning, LED indicators |
| Amperage | 2A |
Explains signal word severity levels for safety warnings.
Advises on proper placement of the charger relative to the battery.
Provides precautions for connecting the charger to the battery.
Details the procedure for charging a battery while it is in a vehicle.
Describes how to deploy and use the unit's hanging hook.
Details the process of charging using battery clamps.
Explains charging procedure using terminal rings.
