10
ENGLISH
Description (Fig.A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Auto On/Off switch
2
Battery
3
Battery release button
4
Safety valve
5
Tank pressure gauge
6
One-turn regulator
7
Drain valve
8
Check valve
9
Quick-connect coupler
10
Carry handle
11
Tank
Intended Use
Your compressor is designed to generate compressed air which
can be used for professional finish nailing, staplingand other
compressed air applications.
THE USE OF THIS COMPRESSOR IN THE MEDICAL AND
FOOD SECTORS, AS WELL AS THE REFILLING OF OXYGEN
TANKS, IS NOT PERMITTED.
DO NOT use under wet conditions or in the presence
of flammable liquids orgases. DO NOT use or store the
compressor at temperatures below 0°C.
Your compressor is a professional power tool.
DO NOT let children come into contact with the tool. Supervision
is required when inexperienced operators use thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Date Code Position (Fig.A)
The date code
6
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2022XX XX
Year and Week of Manufacture
D Risk of accidental start-up. NOTICE: The compressor
could start automatically in case of a black-out and
subsequentreset. WARNING: Compressor unit may start
withoutwarning.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual beforeuse.
Wear eyeand earprotection.
93
Outdoor noise level
I
Airdisplacement.
J
Set outlet pressure to zero before the air hose
is attached orremoved.
H
Air tankcapacity.
G
Oil-lesspump.
Approx. cut-outpressure.
Tilt compressor towards drain valve while draining
the tank.
Drain tank daily before and after use.
C Risk of hightemperatures.
CAUTION: The compressor contains some parts which might
reach hightemperatures.
Package Contents
The package contains:
1 Air compressor
1 Charger
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by
DeWALT is under license. Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.