DeWalt XR DCC1018 User Manual

5
ENGLISH
3 . ALWAYS WEAR EYE PROTECTION. Always wear safety
goggles or equivalent eye protection. Compressed air must
never be aimed at anyone or any part of thebody.
4 . PROTECT YOURSELF AGAINST ELECTRIC SHOCK. Prevent
body contact with grounded surfaces such as pipes,
radiators, ranges and refrigeration enclosures. Never
operate the compressor in damp or wet locations. Never
leave the compressor exposed to adverse weatherconditions.
5 . DISCONNECT THE COMPRESSOR WHEN NOT IN USE. Always
disconnect the compressor from the power source and remove
the compressed air from the air tank before servicing, inspecting,
maintaining, cleaning, replacing or checking anyparts.
6 . AVOID UNINTENTIONAL STARTING. Do not transport
the compressor over long distances, in a vehicle or in
potentially dangerous situations, for example, on a ladder
or scaffold while it is connected to its power source or
when the air tank is filled with compressed air. Be sure the
auto ON/ OFF switch is in the OFF position before connecting the
compressor to its powersource.
7 . STORE COMPRESSOR PROPERLY. When not in use, the
compressor should be stored in dry place. Keep out of
reach of children. Lock‑out the storagearea.
8 . KEEP WORK AREA CLEAN Cluttered areas invite injuries.
Clear all work areas of unnecessary tools, debris, furnitureetc.
9 . KEEP CHILDREN AWAY. All visitors should be kept safely away
from workarea.
10 . DRESS PROPERLY. Do not wear loose clothing or jewellery.
They can be caught in moving parts. Wear protective hair
covering to contain longhair.
11 . STAY ALERT. Watch what you are doing. Use common
sense. Do not operate compressor when you are tired.
Compressor should never be used by you if you are under the
influence of alcohol, drugs or medication that makes youdrowsy.
12 . CHECK FOR DAMAGED PARTS AND AIR LEAKS. Before
further use of the compressor, carefully check the guard
and other parts for damage to make sure that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, air leak, and any
other conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired or
replaced by an authorized service centre unless otherwise
indicated elsewhere in this Instruction Manual. Have
defective pressure switches replaced by authorized service
centre. Do not use compressor if switch does not turn it on
and off. Never attempt to repair a leaking or damaged air
tank. Replace tank immediately at an authorized servicecentre.
13 . NEVER USE COMPRESSOR FOR APPLICATIONS OTHER
THAN THOSE SPECIFIED. Never use compressor for
applications other than those specified in the Instruction
Manual. Never use compressed air for breathing or
respiration. Never stand on thecompressor.
14 . HANDLE COMPRESSOR CORRECTLY. Operate the
compressor according to the instructions provided
herein. Never allow the compressor to be operated by
SAFETY INSTRUCTIONS
Important Safety Instructions for Use of
the Compressor

WARNING: DEATH OR SERIOUS BODILY INJURY
COULD RESULT FROM IMPROPER OR UNSAFE USE
OF COMPRESSOR. TO AVOID THESE RISKS, FOLLOW
THESE BASIC SAFETYINSTRUCTIONS.
READ ALL INSTRUCTIONS
1 . NEVER TOUCH MOVING PARTS. Never place your hands,
fingers or other body parts near the compressor’s movingparts.
2 . NEVER OPERATE WITHOUT ALL GUARDS IN PLACE
Never operate this compressor without all guards or
safety features in place and in proper working order. If
maintenance or servicing requires the removal of a guard or
safety features, be sure to replace the guards or safety feature
before resuming operation of thecompressor.
Battery Tool Use and Care
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another batterypack.
b ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury andfire.
c ) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or afire.
d ) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation orburns.
e ) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
ofinjury.
f ) Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may causeexplosion.
g ) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified range
may damage the battery and increase the risk offire.
Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool ismaintained.
b ) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized serviceproviders.

DeWalt XR DCC1018 Specifications

General

Brand	DeWalt
Model	XR DCC1018
Category	Air Compressor
Language	English