8514-219-001 REV E PAGE 23
6) Press and release either the UP or DOWN touch pad switch on the dryer controller to
change the total dry time. Once either the UP or DOWN touch pad switch is pressed, the
dry time L.E.D. and the total dry time on the 4-digit numeric display will flash. If you press
and hold down either the UP or DOWN touch pad switch, you will increment (UP arrow)
or decrement (DOWN arrow) through the total dry times available (1 through 60 minutes).
This displayed dry time includes the cool down time along with the heated time. To not
change the total dry time, do not press either the UP or DOWN touch pad switch. Go to
the next step.
7) Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once the
SELECT/ENTER touch pad switch is pressed and released, the dry time L.E.D. will switch
off, the dry cycle L.E.D. and programming L.E.D. will remain on, the temperature L.E.D.
will illuminate, and the drying temperature will be shown on the 4-digit numeric display.
8) Press and release either the UP or DOWN touch pad switch on the dryer controller to
change the drying temperature. Each press and release of either the UP or DOWN touch
pad switch will either increase or decrease, respectively, the temperature by five degrees
Fahrenheit or three degrees Celsius, depending on how your dryer controller is set up.
Once either the UP or DOWN touch pad switch is pressed, the temperature L.E.D. and the
drying temperature on the 4-digit numeric display will flash. If you press and hold down
either the UP or DOWN touch pad switch, you will increment (UP arrow) or decrement
(DOWN arrow) your way through the available drying temperatures (105
0
Fahrenheit or
40
0
Celsius, up to 195
0
Fahrenheit or 91
0
Celsius). If you do not want to change the drying
temperature, do not press either the UP or DOWN touch pad switch. Go to the next step.
9) Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once the
SELECT/ENTER touch pad switch is pressed and released, the temperature L.E.D. will
switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, the cool down
L.E.D. will illuminate, and the cool down time will be shown on the 4-digit numeric display.
10) Press and release either the UP or DOWN touch pad switch on the dryer controller to
change the cool down time. Once either the UP or DOWN touch pad switch is pressed,
the cool down L.E.D. and the cool down time on the 4-digit numeric display will flash. If
you press and hold down either the UP or DOWN touch pad switch, you will increment
(UP arrow) or decrement (DOWN arrow) through the cool down times available (2
through 60 minutes if the controller has a red dot sticker or 2 through 15 minutes if the
controller has no red dot sticker). To not change the cool down time, do not press either
the UP or DOWN touch pad switch. Go to the next step.
11) Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once the
SELECT/ENTER touch pad switch is pressed and released, the cool down L.E.D. will
switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, and the 4-digit
numeric display will change to “Prog”.
12) Press and release the STOP touch pad switch on the dryer controller to save the cycle
program and escape the programming mode. If you want to change the same dry cycle
program again, press the SELECT/ENTER touch pad switch on the dryer controller and
continue at step 6 of this procedure. If you want to modify another dry cycle program, go
to step 4 of this procedure and continue.
To Next Page
Loading...
Need help?
General
