Dexter Laundry C-Series User Manual

15
8514-311-001 REV PR
5 Introduction
5.1 Model Identification
Vended, C-Series Control, 50Hz, Industrial Dryers
Model Model #
T-30 DN0030N*-59CB
1
-*****-VRX
T-50 DN0050N*-59CB
1
-*****-VRX
T-80 DN0080N*-59CB
1
-*****-VRX
-
1
Can be a number 1-9
- * Can be character X, C, S, W, B, K, G, A, D, E, F
Table 5-1 Model Identification
5.2 Dryer Characteristics
Dexter Laundry industrial drying machines are designed to dry textile articles in an on-premise
environment by trained or skilled users. Drying is accomplished through the circulation of heat to the
articles in a rotating drum.
Dexter machines utilize high grade stainless-steel for the enclosure and drum. These surfaces limit the
growth of microbes and provide a durable and high-quality look. Drum rotation is produced by an AC
(Alternating Current) motor.
5.3 Definitions
AC Alternating Current CE Conformity Europe
DC Direct Current EMC Electromagnetic Compatibility
EU European Union IA Iowa
IEC International Electrotechnical
Commission
IP Internet Protocol OR Ingress Protection
LED Light Emitting Diode MAC Media Access Control
OPL On-Premise Laundry PCB Printed Circuit Board
RCD Residual Current Device RoHS Restriction of Hazardous Substances
RPM Revolutions Per Minute RTC Real Time Clocks
SWD Stack Washer-Dryer USA United States of America
USB Universal Serial Bus VFD Variable Frequency Drive
WEEE Waste from Electrical and Electronic
Equipment
Table 5-2 Definition Table

Dexter Laundry C-Series Specifications

General

Brand	Dexter Laundry
Model	C-Series
Category	Dryer
Language	English